MIFARE RFID Card Reader/Writer (TTL)

MIFARE RFID Card Reader/Writer (TTL)
Brand: ENTESLA
Product Code: ENTOEM002
Availability: In Stock
Price: Rs.2,200.0
With Tax: Rs.2,310.0

The Entesla Mifare Card Reader/Writer Module is a contact less proximity read/write device that supports various RFID devices out of the MIFARE® family and the ISO 14443A standard. The module comes with an integrated and optimized antenna for a quick and easy integration into applications. By using the serial interface the device can be connected to a controller or any host system easily. The form factor enables a design in even into very compact systems.

Applications

  • e-Payment
  • e-Toll Road Pricing
  • e-Ticketing for Events
  • e-Ticketing for Public Transport
  • Access Control
  • PC Access
  • Authentication
  • Printer / Production Equipment

Features

  • RF Transmit Frequency : 13.56MHz
  • Supported Standards : ISO14443A
  • Supports MIFARE® Standard, MIFARE® 4k, MIFARE® Pro X, MIFARE® Ultralight, MIFARE® DESFire (Serial No. only)
  • Host Communication : Point-to-Point
  • Communications Interface: TTL Serial Interface, Wiegand output
  • Communications Protocol : Specific ASCII
  • Communications Parameter: 9600 Bit/s to 28800 Bit/s, 8, N, 1
  • Power Supply : 5VDC ± 10% regulated
  • Current Consumption : 150 mA , less than 10mA at power down mode.
  • Reading distance : Up to 85mm, depending on tag
  • Antenna : Integrated
  • Size (LxWxH) : 70.0x45.0x16.0mm ± 1.0mm
  • Weight : 16g ± 10% / 0.04 lb± 10%
  • Firmware Version : 1.0

Package Contents

1. Mifare Reader/Writer Module (TTL Version) x 1 Nos.

2. Mifare Reader/Writer Evaluation Kit x 1 Nos  (Only available for online orders)

  • Jumper Wires x 4 Nos.
  • 13.56 MHz RFID Card x 1 Nos.

 

Using the in-built Command Set of MIFARE Reader/Writer with Hyperterminal

Dimensions
Dimension 70.0 x 45.0 x 16.0mm ± 1.0mm
Power Requirements
Input Voltage 5V D.C

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: